OneNet Services

Account Center

  • How do I make a call?
    • Lift the handset from the earpiece rest and enter the number using the dial pad to enter the digits
    • Press a line button and dial the number using the dial pad to enter the digits.
    • Press the NewCall softkey and dial the number using the dial pad to enter the digits.
    • Press the Redial softkey to dial the last called number.
    • If using a headset, press Headset button and dial the number using the dial pad to enter the digits.
    • To use the speakerphone, press Speaker button and dial the number using the dial pad to enter the digits.
  • How do I answer a call?
    • You can answer a call using the handset, headset, or speakerphone.
    • To use the handset, lift the handset from the earpiece rest.
    • To use a headset, press the Headset button, and press the line button of the incoming call.
    • To use the speakerphone, press Answer softkey or the Speaker button
  • How do I end a call?
    • To end a call:
    • To use the handset, put the handset on the earpiece rest.
    • If using the headset, press the EndCall softkey, This method also works for all speaking modes.
    • To use the speakerphone, press the Speaker button
  • How do I mute a call?
    • While on call you can must the handset, headset, or speakerphone to prevent the party you are speaking to you or someone else in the room is saying.
    • To mute a call, press the Mute button
    • To disengage mute, press the Mute button again
  • How do I place a call on hold?
    • While on a call, you can place the call on hold, so that the caller cannot hear you and you cannot hear the caller. You can answer other calls while a call is on hold.
    • To place a call on hold, press the Hold softkey.
    • To return to the call, press the Resume softkey. If multiple calls are on hold, press the Scroll (up and down arrow) key to select the desired call before you press the Resume softkey.
    • If multiple calls on multiple lines are on hold, press the line button for the line to which you want to switch and use the Scroll key to select the desired call before you press the Resume softkey.
  • How do I Transfer a call?
    • Perform the following steps to transfer a call to another phone:
    • Step 1 Press the more softkey and then press the Transfer softkey. This places the call on hold.
    • Step 2 Enter the extension number to which you want to transfer the call.
    • Step 3 After entering the extension number , press the Dial softkey.
    • Step 4 When the extension number that was dialed answers, announce the caller.
    • Step 5 After announcing the call, press the Transfer softkey.
    • Step 6 Hang up if the party accepts the call. If the party refuses the call, return to the original call by pressing the Resume softkey.

      • Transferring a Call without talking to the receiver (Blind)

    • Step 1 After receiving a call, press the more softkey.
    • Step 2 Press the BlndXfer softkey.
    • Step 3 Enter the number of the extension that you wish to transfer the call to.
    • Step 4 When the extension number has been entered, press the Dial softkey.
    • Step 5 Put the handset on the earpiece rest.
  • How Do I Redial the last number dialed?
    • You can redial the most recently dialed number, by lifting the handset from the earpiece rest and pressing the Redial softkey. Or, without lifting the handset from the earpiece rest, you can press the Redial softkey to activate the speakerphone or headset.
  • How do I view or dial Missed Calls?

      If your phone display indicates you have missed one or more calls, you can use the Missed Calls option on the directories menu to view the call history and call back the missed call.

    • Step 1 Press the Directories button.
    • Step 2 Press the Select softkey to select Missed Calls from the Directory menu. The call history for missed calls is displayed on the LCD screen.
    • Step 3 Press the Dial softkey to speed dial the highlighted number, as displayed, from the missed call list.

      • You might need to use the Edit softkey to add digits to the front of the number. For example, if the call was from an outside, long-distance caller, you might need to add the digits “91” to the front of the number displayed.

    • Step 4 Press the Exit softkey twice to exit the Missed Calls directory and the directories menus.
  • How do I view or dial Received or Placed calls?
    • The Cisco IP Phone 7940/7960 keeps a history of all calls you make and receive, including the caller ID, date, and time of the call. You can use this information to redial a party.
    • Step 1 Press the directories button.
    • Step 2 Press the Scroll key to select the desired call history option: Missed Calls, Received Calls, Placed Calls, or Personal Directory.
    • Step 3 Press the Select softkey to display the selected call history list.
    • Step 4 Press the Scroll key to scroll through the numbers listed in the selected call history list.
    • Step 5 If desired, press the Dial softkey to speed dial the highlighted number from the call history list. You might need to use the Edit softkey to add digits to the front of the number. For example, if the call was from an outside, long-distance caller, you might need to add the digits “91” to the front of the number.
    • Step 6 When you are finished, press the Exit softkey twice to exit the selected directory menu and exit the directories menu.
  • How do I Use Call Forwarding?

      Call Forwarding for the Cisco IP Phone 7940/7960 might be handled from a network configuration by the system administrator; or call forwarding can be set up by performing the following steps.

    • Step 1 Press the CFwdAll softkey.
    • Step 2 When the dial tone is heard, enter the digits for the number (to which the phone will be forwarded) using the dial pad.
    • Step 3 When finished dialing, verify Forwarded to xxxxxxxxxx (which is the number the phone is forwarded to) is displayed above the softkeys on the LCD screen.
    • Disabling Call Forwarding
    • Call Forwarding for the Cisco IP Phone 7940/7960 can be disabled by performing the following steps.
    • Step 1 Press the CFwdAll softkey.
    • Step 2 Verify the message Forwarded to xxxxxxxxxx is no longer displayed on the LCD screen.
  • How do I make a Conference Call?

      The Cisco IP Phone 7940/7960 supports conference calls, enabling you to talk with two other called parties.

    • Placing a Conference Call
    • Step 1 During a call, press the Confrn softkey. This selects a new line and places the other party to whom you were speaking on hold.
    • Step 2 Place a call to another number by using the dial pad to enter the digits of the other party to include on the conference call.
    • Step 3 When the call connects, press Confrn again to add the other party to the conference call.
    • Conference Call Tips
      • When the conference call initiator disconnects, the conference call is terminated (if the cdnf_join_enable parameter is set to disabled).
      • To place a conference call on hold, press the Hold softkey. The other parties can not talk among themselves. To avoid disrupting the other callers, consider muting the call instead. To mute the call, press the Mute button.
      • To place a conference call on speakerphone, press the Speaker button. Press the Mute button to mute the speakerphone. The conference parties cannot hear you but you can hear them.
      • The Cisco IP Phone 7940/7960 allows up to three parties in a conference call.
      • Call waiting calls cannot be conferenced in, the conferencing node must establish both legs of the 3-Way conference.
  • How do I Configure Do Not Disturb (DND)?

      You can block incoming calls by configuring the Do Not Disturb feature. Blocked calls are logged in the Missed Calls directory (see the “Viewing or Dialing Missed Calls” section on page 3-7). Perform the following steps to configure the Do Not Disturb feature.

    • Step 1 Press the settings button.
    • Step 2 Press the Scroll key to highlight Call Preferences.
    • Step 3 Press the Select softkey.
    • Step 4 Press the Scroll key to highlight Do Not Disturb from the Call Preferences menu.
    • Step 5 To enable the Do Not Disturb feature, press the Yes softkey. To disable this feature, press the No softkey.
    • Step 6 Press the Save softkey to save your selection of this feature and displays the Settings menu.
    • Step 7 Press the Back softkey to display the main LCD screen. A Do not disturb message is displayed on the LCD screen.
    • Note: When Do not disturb is enabled, a Do not disturb message is displayed on the LCD screen. You can disable Do not disturb by pressing the DND softkey or by performing the preceding steps and press the No softkey.
  • How do I Configure Call Blocking ?

      You can configure your phone to have your phone number or e-mail address blocked from phones with caller identification capabilities by using the Caller ID Blocking feature. Perform the following steps to configure the Caller ID Blocking feature.

    • Step 1 Press the settings button.
    • Step 2 Press the Scroll key to highlight Call Preferences.
    • Step 3 Press the Select softkey.
    • Step 4 Press the Scroll key to highlight CallerID Blocking from the Call Preferences menu.
    • Step 5 To enable the CallerID Blocking feature, press the Yes softkey. To disable the feature, press the No softkey.
    • Step 6 Press the Save softkey to save your selection of this feature and display the Settings menu.
    • Step 7 Press the Back softkey to display the main LCD screen.
  • How do I Block anonymous Calls ?

      You can block all anonymous calls through the Anonymous Call Block feature by performing the following steps:

    • Step 1 Press the settings button.
    • Step 2 Press the Scroll key to highlight Call Preferences.
    • Step 3 Press the Select softkey.
    • Step 4 Press the Scroll key to highlight Anonymous Call Block from the Call Preferences menu.
    • Step 5 To enable the Anonymous Call Block feature, press the Yes softkey. To disable this feature, press the No softkey.
    • Step 6 Press the Save softkey to save your selection of this feature and display the Settings menu.
    • Step 7 Press the Back softkey to display the main LCD screen
  • How do I Configure Call Waiting ?

      You can configure your phone to provide a tone indicating an incoming call is waiting while on another call by using the Call Waiting feature. Perform the following steps to configure the Call Waiting feature.

    • Step 1 Press the settings button.
    • Step 2 Press the Scroll key to highlight Call Preferences.
    • Step 3 Press the Select softkey.
    • Step 4 Press the Scroll key to highlight Call Waiting from the Call Preferences menu.
    • Step 5 To enable the Call Waiting feature, press the Yes softkey. To disable the feature, press the No softkey.
    • Step 6 Press the Save softkey to save your selection of this feature and display the Settings menu.
    • Step 7 Press the Back softkey to display the main LCD screen.
  • How do I Call Hold Ringback ?

      You can configure your phone to provide a ringback tone indicating a call is waiting on hold when you hang up the active call by using the Call Hold Ringback feature. Perform the following steps to configure the Call Hold Ringback feature:

    • Step 1 Press the settings button.
    • Step 2 Press the Scroll key to highlight Call Preferences.
    • Step 3 Press the Select softkey.
    • Step 4 Press the Scroll key to highlight Call Hold Ringback from the Call Preferences menu.
    • Step 5 To enable the Call Hold Ringback feature, press the Yes softkey. To disable the feature, press the No softkey.
    • Step 6 Press the Save softkey to save your selection of this feature and display the Settings menu.
    • Step 7 Press the Back softkey to display the main LCD screen.
  • How do I Configure Stutter Message Waiting ?

      You can configure your phone to provide a stutter dial tone when there is a message waiting when you receive dial tone for making a call by using the Stutter Msg. Waiting feature. Perform the following steps to configure the Stutter Msg. Waiting feature:

    • Step 1 Press the settings button.
    • Step 2 Press the Scroll key to highlight Call Preferences.
    • Step 3 Press the Select softkey.
    • Step 4 Press the Scroll key to highlight Stutter Msg. Waiting from the Call Preferences menu.
    • Step 5 To enable the Stutter Msg. Waiting feature, press the Yes softkey. To disable the feature, press the No softkey.
    • Step 6 Press the Save softkey to save your selection of this feature and display the Settings menu.
    • Step 7 Press the Back softkey to display the main LCD screen.
  • How do I Configure Auto Answer (Intercom) ?

      You can configure your phone to automatically answer an incoming call to the speaker by using the Auto Answer (Intercom) feature. Perform the following steps to configure the Auto Answer (Intercom) feature:

    • Step 1 Press the settings button.
    • Step 2 Press the Scroll key to highlight Call Preferences.
    • Step 3 Press the Select softkey.
    • Step 4 Press the Scroll key to highlight Auto Answer (Intercom) from the Call Preferences menu.
    • Step 5 Press the Scroll key to highlight the line (Line 1 or Line 2) you want to configure for auto answer.
    • Step 6 To enable the Auto Answer (Intercom) feature for the selected line, press the Yes softkey. To disable the feature for the selected line, press the No softkey.
    • Step 7 Repeat Step 5 and Step 6 if you want to enable or disable this feature for the other line.
    • Step 8 Press the Save softkey to save your selection of this feature and display the Settings menu.
    • Step 9 Press the Back softkey to display the main LCD screen.
  • How do I Configure Speed Dial Lines?

      You can configure your phone to automatically dial a number when you press a button by using the Speed Dial Lines feature. Perform the following steps to configure the Speed Dial Lines feature.

    • Step 1 Press the settings button.
    • Step 2 Press the Scroll key to highlight Call Preferences.
    • Step 3 Press the Select softkey.
    • Step 4 Press the Scroll key to highlight Speed Dial Lines from the Call Preferences menu.
    • Step 5 Press the Select softkey.
    • Step 6 Press the Scroll key to highlight Line 3, Line 4, Line 5, or Line 6.
      • Note There are four possible speed dial numbers that can be configured on the Cisco IP 7960G and one possible speed dial number on the Cisco IP 7940G.
    • Step 7 Press the Edit softkey.
    • Step 8 Enter a brief description for the selected speed dial line for New Label. Depending on the letter, you might need to press the number button on the dialing pad one or more times to scroll through the list of displayed characters until you highlight the correct character. You can press the <-- softkey to move the cursor one character to the left deleting the last character each time the softkey is pressed. Pressing the 1, *, or 0 keypad keys allows you to enter some special characters.
    • Step 9 Press the Scroll key down arrow to select the New Number line.
    • Step 10 Press the Number softkey and enter a number for the selected speed dial line.
    • Step 11 When the New Label and New Number are correct, press the Accept softkey.

        Note The message: Input too long may be displayed if you entered too many characters for a label or for a number.

    • Step 12 Repeat Step 6 through Step 11 if you want to set speed dial for another line.
    • Step 13 Press the Back softkey to display the Call Preferences menu.
    • Step 14 Press the Back softkey repeatedly to display another menu or until the main LCD screen is displayed.